FREQUENTLY ASKED QUESTIONS

All Stop X versions, provide an amazing user experience and proven efficacy and safety. The device models have minor distinctions, based on regulatory and standards requirements, in the various regions.

There is no need to get prepared for treatment; however, you should avoid getting sunburned before the treatment, as it cannot be performed on freshly tanned skin. There are guidelines regarding the proximity of treatments to other aesthetic treatment modalities, which your practitioner will know.

Usually, a series of 3-4 treatments is recommended, however, it is possible to perform more treatments for enhanced improvement of wrinkles or in cases of severe acne scarring. Treatments are normally spaced at a 1-month interval.

Treatments are safe when conducted according to the guidelines. The energy levels used during the treatments were tested and validated to be safe and effective with no significant risk of injury or damage to the skin.

A treatment can take a few minutes if only a small area is treated. For a full-face treatment, it can take about 20-30 minutes.

OxyGeneo™ is an innovative technology for skin exfoliation (removal of dead skin cells from the skin surface), improving skin oxygen levels and infusion of valuable products to enrich the skin. The simultaneous skin exfoliation along with skin oxygenation optimizes the absorption of the valuable components in the nutrient-rich gels into the skin. This treatment is great for teenagers with congestion who don’t need the tripolar anti-ageing component of the 4-in–1 facial.

OxyGeneo™ capitalizes on the Bohr Effect that was discovered by Christian Bohr in 1904. The effect indicates that when the CO2 (Carbon dioxide) concentration increases, the hemoglobin releases oxygen from within. The OxyGeneo™ interaction between the capsule and the treatment gel creates abundance of CO2 on the skin that triggers the Bohr Effect that oxygenate the skin naturally. Oxygenating the skin is beneficial in all anti-aging and corrective skin procedures.

An OxyGeneo™ treatment feels like a massage for the face. The exfoliation is described as very refreshing and comfortable and, because there is no vacuum procedure (like with other facial devices) the overall treatment is more soothing and relaxing. Many clients fall asleep and wake feeling rested and rejuvenated. More sensitive skin type clients may have a warm sensation on the skin during the first part of the treatment.

After the OxyGeneo™ treatment the skin is rich with oxygen and nutrients of the oxypods, it will look smooth, soft, shiny, plump and radiant. The skin feels fresh, soft, smooth and active.

The use of a vacuum (like with a microdermabrasion device and other infusion technologies) can damage the capillaries and cause visible small veins over time. Because the OxyGeneo™ is a non-vacuum device, it’s safe for use on all skin types (including sensitive skin), in capillary-rich areas of the face such as the nose, and on the sensitive skin around the eyes and mouth.

To treat skin issues such as sun damage or acne, once a week treatments are recommended. Scheduling an OxyGeneo™ treatment once a month to treat the skin is the perfect long term anti-aging maintenance program. Your skin care specialist will set you up with a schedule that best suits your needs.

Yes! The OxyGeneo™ treatment has no downtime and the skin looks and feels great right after the treatment. If you have an upcoming event, schedule your OxyGeneo™ treatment on the same day or a day before and the effect will be well visible during the event.

The treatment sensation has two aspects. Since the TriLipo technology combines RF with Dynamic Muscle Activation (DMA), the sensation is a result of both technologies. The RF effect will be a heating effect of the skin. You should feel a very pleasant heating of the area, similar to a warm massage.

The DMA has various power levels and the sensation is different per DMA strength. The practitioner will adjust the DMA parameters to enable a very tolerable treatment. DMA at low energy levels feels like bubbles bursting on the skin surface. As the DMA parameters are increased, the sensation changes to a sensation similar to rubber bands snapping in the treated area and higher DMA parameters will induce a sensation of real muscle contraction.

There are no special requirements or preparations for a Maximus TriLipo treatment.

There is no down time after a Maximus TriLipo treatment; you can resume your regular activity immediately after the treatment.

The treatment duration for each body area varies, with most treatments taking from 30 minutes (for smaller areas) to 1 hour (for larger areas).

Typically, the standard protocol for these treatments is 6 sessions. However, if needed, more treatments can be added according to severity of the condition. Maintenance treatments are recommended every 1-3 months to maintain and improve the treatment results.

Maximus treatments are painless and non-invasive with no downtime, making treatments an excellent option for face and body improvements.

Results are different per body area and per person. In general, facial treatments will usually produce a nice immediate tightening and improvement of skin texture. Loose skin on the abdomen can feel tighter immediately after the first session. However, in most cases it takes several treatments to notice long lasting results

Tripollar combined with DMA technology is very safe. RF has been used in medicine for over 80 years, and in aesthetic medicine for more than 15 years. The Dynamic Muscle Activation (DMA) treatments are completely safe, and clinically proven to stimulate the muscles with no risk of damaging the tissue.

A treatment can take a few minutes if only a small area is treated. For a full-face treatment, the treatment can take about 20-30 minutes.